Activity |
SP |
Price |
AEDÂ 341.75 |
Pincode Group |
default |
Part Number |
SRV15KRILRK |
Acoustic Level |
65 dBA |
Additional Information |
Configurable for 220 : 230 or 240 nominal output voltage |
Alarm |
alarm when on battery : distinctive low battery alarm : overload continuous tone alarm |
ambient air temperature for storage |
-20-60 °C |
Battery Charger Power |
2340 W rated |
Battery Curve |
C |
Battery Option |
SRV120RLBP2-9A 1 5140 VAh , SRV120RLBP2-9A 2 6800 VAh , SRV120RLBP2-9A 3 8600 VAh , SRV120RLBP2-9A 4 10350 VAh , SRV120RLBP2-9A 5 12020 VAh , SRV120RLBP2-9A 6 13860 VAh , SRV120RLBP2-9A 7 15530 VAh , SRV120RLBP2-9A 8 17290 VAh |
Battery Power in Vah |
3470 VAh runtime |
Battery Recharge Time |
6 h |
Battery Type |
VRLA |
Battery Voltage |
+/- 120 V |
Bypass Type |
internal bypass (automatic and manual) |
colour |
black (RAL 7010) |
Control Panel |
multifunction LCD status and control console |
Crest Factor |
03:01 |
Curve Equation |
efficiency |
Curve Fixed Loss |
0.0142 |
Curve Load Maximum |
100% |
Curve Load Minimum |
2% |
Curve Proportional Loss |
0.0072 |
Curve Square Loss |
0.03 |
Curve Test Cond Id |
Curve fit to measured efficiency data. All measurements taken in normal operating mode, at typical environmental conditions, with nominal electrical input and balanced resistive load (PF = 1.0) output. |
depth |
69.0 cm |
efficiency |
95 % (full load) |
Emergency Power Off |
yes |
Graph Display |
1 |
Harmonic Distortion |
2% |
heat dissipation |
2503 Btu/h |
height |
39.3 cm |
input voltage |
220 V, 230 V, 415 V |
input voltage limits |
110...300 V half load, 176...300 V full load |
IP degree of protection |
IP20 |
Liquid Value |
0 |
Maximum Configurable Power in Va |
15000 VA |
Maximum Configurable Power in w |
15000 W |
Mounting Location |
front |
mounting mode |
rack-mounted |
mounting position |
horizontal |
Mounting Preference |
no preference |
net weight |
157 kg |
network frequency |
40...70 Hz auto sensing |
Number of Battery Filled Slots |
0 |
Number of Battery Free Slots |
0 |
Number of Input Connectors |
1 hard wire 3-wire (1P + N + E), 1 hard wire 5-wire (3P + N + E) |
Number of Rack Unit |
9U |
Number of Tare Power |
1 W |
operating altitude |
0...3000 m |
Output Connector Type |
hard wire 3-wire (1P + N + E) 1 |
Output Frequency |
50/60 Hz +/- 3 Hz sync to mains |
output voltage |
220 V, 240 V |
product certifications |
CE, UKCA |
Provided Equipment |
1 USB cable, 1 RS-232 configuration cable, 3 rack mounting brackets, 3 stabilization/wall mounting feet, 6 jumper bar, 2 external battery pack, 1 battery cable, user manual |
Rated Power in Va |
15000 VA |
rated power in W |
15000 W |
Redundant |
No |
relative humidity |
0-95 % non-condensing |
Show Note Op Temperature |
No |
Storage Altitude |
0-15000 m |
Storage Relative Humidity |
0-95 % non-condensing |
Surge Energy Rate |
600 J |
Ups Type |
double conversion online |
Usb Compatible |
Yes |
Wave Type |
sine wave |
width |
43.8 cm |
Curve X-axis Maximum |
100% |
Curve X-axis Minimum |
0% |
Curve X-axis Title |
load |
Curve X-axis Units |
percentage |
Curve Y-axis Maximum |
100% |
Curve Y-axis Minimum |
50% |
Curve Y-axis Title |
efficiency |
Curve Y-axis Units |
percentage |
Main Input Voltage |
230 V AC, 415 V AC |
ambient air temperature for operation |
0-40 °C |
standards |
EN/IEC 62040-1:2019/A11:2021, EN/IEC 62040-2:2006/AC:2006, EN/IEC 62040-2:2018 |